HYDROS DC Solenoid Water Valve

$28.59

The HYDROS DC Solenoid Valve works with an aquarium controller and water level sensor to add fresh RO or RO/DI water to the tank or sump when the water level is low. 

The HYDROS DC Solenoid Water Valve helps control water flow for reverse osmosis systems. It can be easily connected to a Drive Port on a HYDROS device and does not require an additional power source for operation.

The HYDROS DC Solenoid Valve works with an aquarium controller and water level sensor to add fresh RO or RO/DI water to the tank or sump when the water level is low. 

The HYDROS DC Solenoid Water Valve helps control water flow for reverse osmosis systems. It can be easily connected to a Drive Port on a HYDROS device and does not require an additional power source for operation.

 

HYDROS DC Solenoid Water Valve

Accessory Highlights:

Turn water flow on or off for reverse osmosis systems

Use the solenoid to refill your tank without needing a separate ATO reservoir in your RO filter

Easily connects to standard RO tubing with 1/4″ push-connect fittings

Powered by plugging into a Drive Port on a HYDROS Control

Official CoralVue HYDROS Accessory

One (1) year warranty

 

Included in Package:

Solenoid Valve

HYDROS Drive Power Cable

Applicable with the following HYDROS Devices:

  • Control X2

  • Control X4

  • Control XD

  • Control X10

  • Kraken

Specs:

Voltage: DC 12V
Pressure: 0-0.7 MPA


 
 
 
 

You Might Also Like